24 March 2017 Single-expose patterning development for EUV lithography
Author Affiliations +
Abstract
Initial readiness of EUV (extreme ultraviolet) patterning was demonstrated in 2016 with IBM Alliance's 7nm device technology. The focus has now shifted to driving the 'effective' k1 factor and enabling the second generation of EUV patterning. With the substantial cost of EUV exposure there is significant interest in extending the capability to do single exposure patterning with EUV. To enable this, emphasis must be placed on the aspect ratios, adhesion, defectivity reduction, etch selectivity, and imaging control of the whole patterning process. Innovations in resist materials and processes must be included to realize the full entitlement of EUV lithography at 0.33NA. In addition, enhancements in the patterning process to enable good defectivity, lithographic process window, and post etch pattern fidelity are also required. Through this work, the fundamental material challenges in driving down the effective k1 factor will be highlighted.
Conference Presentation
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Anuja De Silva, Karen Petrillo, Luciana Meli, Jeffrey C. Shearer, Genevieve Beique, Lei Sun, Indira Seshadri, Taehwan Oh, Seulgi Han, Nicole Saulnier, Joe Lee, John C. Arnold, Bassem Hamieh, Nelson M. Felix, Tsuyoshi Furukawa, Lovejeet Singh, Ramakrishnan Ayothi, "Single-expose patterning development for EUV lithography", Proc. SPIE 10143, Extreme Ultraviolet (EUV) Lithography VIII, 101431G (24 March 2017); doi: 10.1117/12.2261216; https://doi.org/10.1117/12.2261216
PROCEEDINGS
9 PAGES + PRESENTATION

SHARE
Back to Top