12 April 2017 Electrical test prediction using hybrid metrology and machine learning
Author Affiliations +
Electrical test measurement in the back-end of line (BEOL) is crucial for wafer and die sorting as well as comparing intended process splits. Any in-line, nondestructive technique in the process flow to accurately predict these measurements can significantly improve mean-time-to-detect (MTTD) of defects and improve cycle times for yield and process learning. Measuring after BEOL metallization is commonly done for process control and learning, particularly with scatterometry (also called OCD (Optical Critical Dimension)), which can solve for multiple profile parameters such as metal line height or sidewall angle and does so within patterned regions. This gives scatterometry an advantage over inline microscopy-based techniques, which provide top-down information, since such techniques can be insensitive to sidewall variations hidden under the metal fill of the trench. But when faced with correlation to electrical test measurements that are specific to the BEOL processing, both techniques face the additional challenge of sampling. Microscopy-based techniques are sampling-limited by their small probe size, while scatterometry is traditionally limited (for microprocessors) to scribe targets that mimic device ground rules but are not necessarily designed to be electrically testable. A solution to this sampling challenge lies in a fast reference-based machine learning capability that allows for OCD measurement directly of the electrically-testable structures, even when they are not OCD-compatible. By incorporating such direct OCD measurements, correlation to, and therefore prediction of, resistance of BEOL electrical test structures is significantly improved. Improvements in prediction capability for multiple types of in-die electrically-testable device structures is demonstrated. To further improve the quality of the prediction of the electrical resistance measurements, hybrid metrology using the OCD measurements as well as X-ray metrology (XRF) is used. Hybrid metrology is the practice of combining information from multiple sources in order to enable or improve the measurement of one or more critical parameters. Here, the XRF measurements are used to detect subtle changes in barrier layer composition and thickness that can have second-order effects on the electrical resistance of the test structures. By accounting for such effects with the aid of the X-ray-based measurements, further improvement in the OCD correlation to electrical test measurements is achieved. Using both types of solution incorporation of fast reference-based machine learning on nonOCD-compatible test structures, and hybrid metrology combining OCD with XRF technology improvement in BEOL cycle time learning could be accomplished through improved prediction capability.
Conference Presentation
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mary Breton, Mary Breton, Robin Chao, Robin Chao, Gangadhara Raja Muthinti, Gangadhara Raja Muthinti, Abraham A. de la Peña, Abraham A. de la Peña, Jacques Simon, Jacques Simon, Aron J. Cepler, Aron J. Cepler, Matthew Sendelbach, Matthew Sendelbach, John Gaudiello, John Gaudiello, Susan Emans, Susan Emans, Michael Shifrin, Michael Shifrin, Yoav Etzioni, Yoav Etzioni, Ronen Urenski, Ronen Urenski, Wei Ti Lee, Wei Ti Lee, } "Electrical test prediction using hybrid metrology and machine learning", Proc. SPIE 10145, Metrology, Inspection, and Process Control for Microlithography XXXI, 1014504 (12 April 2017); doi: 10.1117/12.2261091; https://doi.org/10.1117/12.2261091

Back to Top