28 March 2017 A complete methodology towards accuracy and lot-to-lot robustness in on-product overlay metrology using flexible wavelength selection
Author Affiliations +
The optical coupling between gratings in diffraction-based overlay triggers a swing-curve1,6 like response of the target’s signal contrast and overlay sensitivity through measurement wavelengths and polarizations. This means there are distinct measurement recipes (wavelength and polarization combinations) for a given target where signal contrast and overlay sensitivity are located at the optimal parts of the swing-curve that can provide accurate and robust measurements. Some of these optimal recipes can be the ideal choices of settings for production. The user has to stay away from the non-optimal recipe choices (that are located on the undesirable parts of the swing-curve) to avoid possibilities to make overlay measurement error that can be sometimes (depending on the amount of asymmetry and stack) in the order of several “nm”. To accurately identify these optimum operating areas of the swing-curve during an experimental setup, one needs to have full-flexibility in wavelength and polarization choices. In this technical publication, a diffraction-based overlay (DBO) measurement tool with many choices of wavelengths and polarizations is utilized on advanced production stacks to study swing-curves. Results show that depending on the stack and the presence of asymmetry, the swing behavior can significantly vary and a solid procedure is needed to identify a recipe during setup that is robust against variations in stack and grating asymmetry. An approach is discussed on how to use this knowledge of swing-curve to identify recipe that is not only accurate at setup, but also robust over the wafer, and wafer-to-wafer. KPIs are reported in run-time to ensure the quality / accuracy of the reading (basically acting as an error bar to overlay measurement).
Conference Presentation
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kaustuve Bhattacharyya, Kaustuve Bhattacharyya, Arie den Boef, Arie den Boef, Marc Noot, Marc Noot, Omer Adam, Omer Adam, Grzegorz Grzela, Grzegorz Grzela, Andreas Fuchs, Andreas Fuchs, Martin Jak, Martin Jak, Sax Liao, Sax Liao, Ken Chang, Ken Chang, Vincent Couraudon, Vincent Couraudon, Eason Su, Eason Su, Wilson Tzeng, Wilson Tzeng, Cathy Wang, Cathy Wang, Christophe Fouquet, Christophe Fouquet, Guo-Tsai Huang, Guo-Tsai Huang, Kai-Hsiung Chen, Kai-Hsiung Chen, Y. C. Wang, Y. C. Wang, Kevin Cheng, Kevin Cheng, Chih-Ming Ke, Chih-Ming Ke, L. G. Terng, L. G. Terng, } "A complete methodology towards accuracy and lot-to-lot robustness in on-product overlay metrology using flexible wavelength selection", Proc. SPIE 10145, Metrology, Inspection, and Process Control for Microlithography XXXI, 101450A (28 March 2017); doi: 10.1117/12.2257662; https://doi.org/10.1117/12.2257662

Back to Top