24 March 2017 Improving the topography performance of ion implantation resist
Author Affiliations +
Abstract
As the fin based field effect transistors (Fin-FET) emerge, the device structure is changed from two dimensional to three dimensional. Due to the existence of topography, the lithographic performance may be affected and, in most cases, becomes more complicated, especially in the ion implantation process after gate being constructed. In this paper, the various parameters that may have influence on the resist topography are being investigated, such as the density, height, and corner rounding of the fin structures, the height, and the corner rounding of the gates, etc. Theoretical analysis shows that the resist image intensity among the fins and gates can be improved by increasing the thickness of the oxide on the edge of the gate. Following the above theoretical analysis, a method for lithographic performance improvement with the existence of resist topography is proposed. The method is demonstrated from the simulations with the lithography simulator PROLITH. With an optimal thickness of oxide on the surface of gate, the residual resist in the topography after development will be removed thoroughly. Compared with other methods, the proposed method requires neither a specific system setup nor an additional etch process, which is a tremendous cost-saving in mass production.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lisong Dong, Lisong Dong, Wenhui Chen, Wenhui Chen, Xiaojing Su, Xiaojing Su, Yayi Wei, Yayi Wei, } "Improving the topography performance of ion implantation resist", Proc. SPIE 10147, Optical Microlithography XXX, 101471E (24 March 2017); doi: 10.1117/12.2257776; https://doi.org/10.1117/12.2257776
PROCEEDINGS
12 PAGES


SHARE
Back to Top