30 March 2017 Design intent optimization at the beyond 7nm node: the intersection of DTCO and EUVL stochastic mitigation techniques
Author Affiliations +
Abstract
The initial readiness of EUV patterning was demonstrated in 2016 with IBM Alliance's 7nm device technology. The focus has now shifted to driving the 'effective' k1 factor and enabling the second generation of EUV patterning. Thus, Design Technology Co-optimization (DTCO) has become a critical part of technology enablement as scaling has become more challenging and the industry pushes the limits of EUV lithography. The working partnership between the design teams and the process development teams typically involves an iterative approach to evaluate the manufacturability of proposed designs, subsequent modifications to those designs and finally a design manual for the technology. While this approach has served the industry well for many generations, the challenges at the Beyond 7nm node require a more efficient approach. In this work, we describe the use of “Design Intent” lithographic layout optimization where we remove the iterative component of DTCO and replace it with an optimization that achieves both a “patterning friendly” design and minimizes the well-known EUV stochastic effects. Solved together, this “design intent” approach can more quickly achieve superior lithographic results while still meeting the original device’s functional specifications.

Specifically, in this work we will demonstrate “design intent” optimization for critical BEOL layers using design tolerance bands to guide the source mask co-optimization. The design tolerance bands can be either supplied as part of the original design or derived from some basic rules. Additionally, the EUV stochastic behavior is mitigated by enhancing the image log slope (ILS) for specific key features as part of the overall optimization. We will show the benefit of the “design intent approach” on both bidirectional and unidirectional 28nm min pitch standard logic layouts and compare the more typical iterative SMO approach. Thus demonstrating the benefit of allowing the design to float within the specified range. Lastly, we discuss how the evolution of this approach could lead to layout optimization based entirely on some minimal set of functional requirements and process constraints.
Conference Presentation
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael Crouse, Michael Crouse, Lars Liebmann, Lars Liebmann, Vince Plachecki, Vince Plachecki, Mohamed Salama, Mohamed Salama, Yulu Chen, Yulu Chen, Nicole Saulnier, Nicole Saulnier, Derren Dunn, Derren Dunn, Itty Matthew, Itty Matthew, Stephen Hsu, Stephen Hsu, Keith Gronlund, Keith Gronlund, Francis Goodwin, Francis Goodwin, } "Design intent optimization at the beyond 7nm node: the intersection of DTCO and EUVL stochastic mitigation techniques", Proc. SPIE 10148, Design-Process-Technology Co-optimization for Manufacturability XI, 101480H (30 March 2017); doi: 10.1117/12.2260865; https://doi.org/10.1117/12.2260865
PROCEEDINGS
13 PAGES + PRESENTATION

SHARE
RELATED CONTENT


Back to Top