11 April 1989 Lattice Strain Measurements In Silicon Micropositioning Elements By X-Ray Topography
Author Affiliations +
Proceedings Volume 1015, Micromachining Optical Components and Precision Engineering; (1989) https://doi.org/10.1117/12.949451
Event: 1988 International Congress on Optical Science and Engineering, 1988, Hamburg, Germany
Abstract
X-ray diffraction methods were developed for the investigation of strain fields in mechanical components of monocrystalline silicon. This local strain fields arise from external forces and from surface defects. Two simple examples of strained silicon are shown in this paper. The average value of the surface region destroyed by slicing with a diamond wheel was 50 μm and by mechanical grinding about 80 μm thick. This destroyed surface region must be removed by an etching procedure, for getting strain free mechanical components.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
D. Windisch, D. Windisch, P. Becker, P. Becker, } "Lattice Strain Measurements In Silicon Micropositioning Elements By X-Ray Topography", Proc. SPIE 1015, Micromachining Optical Components and Precision Engineering, (11 April 1989); doi: 10.1117/12.949451; https://doi.org/10.1117/12.949451
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT

Optoelectronic properties of ion-etched silicon surfaces
Proceedings of SPIE (April 21 2008)
Open-faced z-shaped channel-cut x-ray monochromator
Proceedings of SPIE (November 02 2004)
Recent trends in silicon micromachining technology
Proceedings of SPIE (September 18 1995)
McCarter superfinish grinding for silicon: an update
Proceedings of SPIE (January 04 2001)
Calibration of height-measuring probes
Proceedings of SPIE (March 31 1992)

Back to Top