You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
11 November 2016Relative humidity sensor based on SMS fiber structure using multimode coreless fiber
Singlemode-Multimode-Singlemode (SMS) optical fiber structure using multimode coreless have been able to sense changes in relative humidity. In this experiment the measured humidity is 60 % -90 %, while the method is done by comparing the relative humidity changes with the change in output power in the optical fiber. Then the underlying phenomena is the change in the refractive index of air as the cladding MMF coreless due to changes in relative humidity. It has been done three length variations MMF coreless to add sensitivity sensor, and the obtained sensor by 22.30 mm MMF length have the greatest sensitivity, that is 0.0747 dBm / %. Obtained conclusions on length variation will cause any change in the sensitivity significantly in relative humidity between 75 % -80 %.
The alert did not successfully save. Please try again later.
Sanif Syafrani, Agus M. Hatta, Apriani Kusumawardhani, "Relative humidity sensor based on SMS fiber structure using multimode coreless fiber," Proc. SPIE 10150, Second International Seminar on Photonics, Optics, and Its Applications (ISPhOA 2016), 101500R (11 November 2016); https://doi.org/10.1117/12.2248498