11 November 2016 Fabrication slab waveguide based polymethyl methacrylate (PMMA) with spin coating method
Author Affiliations +
Proceedings Volume 10150, Second International Seminar on Photonics, Optics, and Its Applications (ISPhOA 2016); 101501H (2016) https://doi.org/10.1117/12.2248504
Event: Second International Seminar on Photonics, Optics, and Its Applications (ISPhOA 2016), 2016, Bali, Indonesia
Abstract
Fabrication and characterization slab waveguide based polymethyl methacrylate (PMMA) has been carried out. Slab waveguide fabrication done by the spin coating method. Slab waveguide fabrication process carried out by the rotational speed of 1000, 2000, and 3000 rpm respectively played for 10 seconds. Then the slab waveguides heated using a hot plate. Heating process starting from room temperature then increased 5°C to 70°C with a 5 minute warm-up time interval. From the results of characterization fabricated slab waveguides to determine the film thickness is made. Then made observations on the waveguide by passing the light beam He-Ne laser on the thin layer through a single mode optical fiber. From the results of characterization is known that the fabrication of a slab waveguide with a layer thickness of 166 μm. From this research it is known that polymethyl methacrylate (PMMA) can be used as a waveguide with a spin coating method.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alan Andriawan, Alan Andriawan, Yono Hadi Pramono, Yono Hadi Pramono, Asnawi Masoed, Asnawi Masoed, } "Fabrication slab waveguide based polymethyl methacrylate (PMMA) with spin coating method", Proc. SPIE 10150, Second International Seminar on Photonics, Optics, and Its Applications (ISPhOA 2016), 101501H (11 November 2016); doi: 10.1117/12.2248504; https://doi.org/10.1117/12.2248504
PROCEEDINGS
5 PAGES


SHARE
Back to Top