11 November 2016 Attempt to prepare perovskite PZT at low temperatures using IBAD
Author Affiliations +
Proceedings Volume 10151, Optics and Measurement International Conference 2016; 101510M (2016) https://doi.org/10.1117/12.2257328
Event: Optics and Measurement 2016 International Conference, 2016, Liberec, Czech Republic
Abstract
Lead zirconate titanate (Pb[ZrxTi1-x]O3 ) is well-known for his excellent ferroelectric, piezoelectric and electromechanical properties. These properties are closely related to the perovskite crystal structure of PZT. A common way to achieve thin film of perovskite PZT is to anneal the layer after deposition. The high annealing temperature (600 – 700°C) limits a set of usable substrates. To grow a thin layer of perovskite PZT at reduced temperature it is necessary to add crystallization energy to the system by another way. In this article are presented some results of using ion beam sputtering system (IBS) with ion beam assistance (IBAD) to growth perovskite PZT layer at reduced temperature. This process is very complicated and the resulting layer properties are strongly influenced by deposition parameters (ions energy, chemical composition of the atmosphere in the sputtering chamber etc.). We achieved partial success when pyrochlore crystal structure of PZT was grown at reduced substrate temperature (110°C) (at this temperatures are the PZT layers usually amorphous)
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David Vapenka, David Vapenka, Jiri Hlubucek, Jiri Hlubucek, Petra Horodyska, Petra Horodyska, } "Attempt to prepare perovskite PZT at low temperatures using IBAD", Proc. SPIE 10151, Optics and Measurement International Conference 2016, 101510M (11 November 2016); doi: 10.1117/12.2257328; https://doi.org/10.1117/12.2257328
PROCEEDINGS
5 PAGES


SHARE
Back to Top