19 October 2016 Chemical laser exhaust pipe design research
Author Affiliations +
Proceedings Volume 10152, High Power Lasers, High Energy Lasers, and Silicon-based Photonic Integration; 101520R (2016) https://doi.org/10.1117/12.2246691
Event: International Symposium on Optoelectronic Technology and Application 2016, 2016, Beijing, China
Abstract
In order to weaken the chemical laser exhaust gas influence of the optical transmission, a vent pipe is advised to emissions gas to the outside of the optical transmission area. Based on a variety of exhaust pipe design, a flow field characteristic of the pipe is carried out by numerical simulation and analysis in detail. The research results show that for uniform deflating exhaust pipe, although the pipeline structure is cyclical and convenient for engineering implementation, but there is a phenomenon of air reflows at the pipeline entrance slit which can be deduced from the numerical simulation results. So, this type of pipeline structure does not guarantee seal. For the design scheme of putting the pipeline contract part at the end of the exhaust pipe, or using the method of local area or tail contraction, numerical simulation results show that backflow phenomenon still exists at the pipeline entrance slit. Preliminary analysis indicates that the contraction of pipe would result in higher static pressure near the wall for the low speed flow field, so as to produce counter pressure gradient at the entrance slit. In order to eliminate backflow phenomenon at the pipe entrance slit, concerned with the pipeline type of radial size increase gradually along the flow, flow field property in the pipe is analyzed in detail by numerical simulation methods. Numerical simulation results indicate that there is not reflow phenomenon at entrance slit of the dilated duct. However the cold air inhaled in the slit which makes the temperature of the channel wall is lower than the center temperature. Therefore, this kind of pipeline structure can not only prevent the leak of the gas, but also reduce the wall temperature. In addition, compared with the straight pipe connection way, dilated pipe structure also has periodic structure, which can facilitate system integration installation.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yunqiang Sun, Zhilong Huang, Zhiqiang Chen, Zebin Ren, Longde Guo, "Chemical laser exhaust pipe design research", Proc. SPIE 10152, High Power Lasers, High Energy Lasers, and Silicon-based Photonic Integration, 101520R (19 October 2016); doi: 10.1117/12.2246691; https://doi.org/10.1117/12.2246691
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT


Back to Top