Paper
19 October 2016 Computations involved in IBF process and introduction of the software IBFCAM
Lin Zhou, Yifan Dai, Xuhui Xie, Shengyi Li
Author Affiliations +
Proceedings Volume 10154, Advanced Optical Design and Manufacturing Technology and Astronomical Telescopes and Instrumentation; 101541S (2016) https://doi.org/10.1117/12.2247130
Event: International Symposium on Optoelectronic Technology and Application 2016, 2016, Beijing, China
Abstract
Ion beam figuring (IBF) is a deterministic and powerful optical figuring process to high-end optics. To perform an IBF process, some computations are inevitably involved, such as to extract beam removal functions, to calculate dwell times, to determine scan velocities and to recognize the removal rate. These computations influence the process time and the process result of the IBF. In this paper, the computations involved in an IBF process are introduced and the software IBFCAM, which is developed by us to implement all the computations, is also introduced. IBFCAM is well designed and it consists of 6 modules, including IBFCAM. Read, IBFCAM. Removal, IBFCAM.BRF, IBFCAM. Time, IBFCAM. Code and IBFCAM. PostAnalysis. Each module deal with a relatively independent function. Particularly, The IBFCAM. Post Analysis is newly added to IBFCAM in version 5.0. It is used to recognize the actual the removal rate. especially useful to a new material or a new optics. This is very useful to a new optics, especially to a new material.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lin Zhou, Yifan Dai, Xuhui Xie, and Shengyi Li "Computations involved in IBF process and introduction of the software IBFCAM", Proc. SPIE 10154, Advanced Optical Design and Manufacturing Technology and Astronomical Telescopes and Instrumentation, 101541S (19 October 2016); https://doi.org/10.1117/12.2247130
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ion beam finishing

Ion beams

Optical fabrication

RELATED CONTENT

Fabricating effect of charged ion beam on optical lenses
Proceedings of SPIE (August 06 2014)
ISERM: in-situ etch rate measurement system
Proceedings of SPIE (June 30 2016)
Ion beam figuring of CVD silicon carbide mirrors
Proceedings of SPIE (November 21 2017)
IBF technology for nanomanufacturing technology
Proceedings of SPIE (October 06 2010)
Ultraprecision optical fabrication on fused silica
Proceedings of SPIE (October 16 2012)

Back to Top