Paper
19 October 2016 Study on the calibration method of metrological performance of ring laser gyroscope
Author Affiliations +
Proceedings Volume 10155, Optical Measurement Technology and Instrumentation; 101552M (2016) https://doi.org/10.1117/12.2247048
Event: International Symposium on Optoelectronic Technology and Application 2016, 2016, Beijing, China
Abstract
Ring Laser Gyroscope (RLG) is a kind of typical inertial device widely used in navigation field. Owing its recent advances, RLG is proposed to be used as angle measuring instrument with highly dynamic performance and loose installation requirement. To prove the reliability of RLG’s angular measuring result, the metrological performance of RLG was analyzed through calibration. A new calibration method was studied to separate RLG’s additional error resource such as bias drift. The special calibrating procedure was designed and the corresponding calibration system was set up. The calibration result shows that the RLG angular measuring system has measuring deviation within ±0.4″ and repeatability within ±0.2″. The study proposes an effective calibration method of RLG’s metrological performance and proves the possibility of RLG’s application in high accuracy in-situ metrology field.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dan Qiao, Zi Xue, and Yao Huang "Study on the calibration method of metrological performance of ring laser gyroscope", Proc. SPIE 10155, Optical Measurement Technology and Instrumentation, 101552M (19 October 2016); https://doi.org/10.1117/12.2247048
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Calibration

Gyroscopes

Metrology

Back to Top