1 November 2016 Research on metal-plated cellulose nitrate flakes and their infrared / millimeter wave characteristics
Author Affiliations +
Proceedings Volume 10157, Infrared Technology and Applications, and Robot Sensing and Advanced Control; 1015739 (2016) https://doi.org/10.1117/12.2247354
Event: International Symposium on Optoelectronic Technology and Application 2016, 2016, Beijing, China
Abstract
Copper-plated and silver-plated cellulose nitrate flakes, which were prepared by using chemical plating technology, were used to jam infrared detector and millimeter-wave radar. It was tested for the conductivity and infrared jamming performance of plating and also the RCS (Radar Cross Section) performance of millimeter-wave radar. Test results showed that the prepared metal-plated cellulose nitrate flakes have obvious conductivity, and infrared total radiation energy of silver plating and copper plating had approximately increased 32% and 21% respectively. Through determination, the millimeter-wave reflecting property and RCS of silver-plated cellulose nitrate flakes were higher than that of copper-plated cellulose nitrate flakes. Therefore, silver-plated cellulose nitrate flakes can be used as an effective infrared / millimeter wave composite jamming material.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shu-qin Ye, Shu-qin Ye, Chen-guang Zhu, Chen-guang Zhu, Li-hong Wang, Li-hong Wang, De-hua Ou’yang, De-hua Ou’yang, Gong-pei Pan, Gong-pei Pan, } "Research on metal-plated cellulose nitrate flakes and their infrared / millimeter wave characteristics", Proc. SPIE 10157, Infrared Technology and Applications, and Robot Sensing and Advanced Control, 1015739 (1 November 2016); doi: 10.1117/12.2247354; https://doi.org/10.1117/12.2247354
PROCEEDINGS
11 PAGES


SHARE
Back to Top