Parametric studies on the nanosecond laser micromachining of the materials

M. Tański; J. Mizeraczyk

doi:10.1117/12.2262065

8 December 2016 Parametric studies on the nanosecond laser micromachining of the materials

M. Tański, J. Mizeraczyk

Author Affiliations +

Proceedings Volume 10159, Laser Technology 2016: Progress and Applications of Lasers; 101590Q (2016) https://doi.org/10.1117/12.2262065
Event: XIth Symposium on Laser Technology, 2016, Jastarnia, Poland

Abstract

In this paper the results of an experimental studies on nanosecond laser micromachining of selected materials are presented. Tested materials were thin plates made of aluminium, silicon, stainless steel (AISI 304) and copper. Micromachining of those materials was carried out using a solid state laser with second harmonic generation λ = 532 nm and a pulse width of τ = 45 ns. The effect of laser drilling using single laser pulse and a burst of laser pulses, as well as laser cutting was studied. The influence of laser fluence on the diameter and morphology of a post ablation holes drilled with a single laser pulse was investigated. The ablation fluence threshold (F_th) of tested materials was experimentally determined. Also the drilling rate (average depth per single laser pulse) of holes drilled with a burst of laser pulses was determined for all tested materials. The studies of laser cutting process revealed that a groove depth increases with increasing average laser power and decreasing cutting speed. It was also found that depth of the laser cut grooves is a linear function of number of repetition of a cut. The quantitative influence of those parameters on the groove depth was investigated.

Citation Download Citation

M. Tański and J. Mizeraczyk "Parametric studies on the nanosecond laser micromachining of the materials", Proc. SPIE 10159, Laser Technology 2016: Progress and Applications of Lasers, 101590Q (8 December 2016); https://doi.org/10.1117/12.2262065

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE