8 December 2016 The process development of laser surface modification of commercially pure titanium (Grade 2) with rhenium
Author Affiliations +
Proceedings Volume 10159, Laser Technology 2016: Progress and Applications of Lasers; 101590S (2016) https://doi.org/10.1117/12.2262087
Event: XIth Symposium on Laser Technology, 2016, Jastarnia, Poland
Abstract
The paper presents the results of the process development of laser surface modification of commercially pure titanium with rhenium. The criterion of the successful/optimal process is the repetitive geometry of the surface, characterized by predictable and repetitive chemical composition over its entire surface as well as special mechanical properties (hardness and wear resistance). The analysis of surface geometry concluded measurements of laser penetration depth and heat affected zone (HAZ), the width of a single track as well as width of a clad. The diode laser installed on the industrial robot carried out the laser treatment. This solution made possible the continuous supply of powder to the substrate during the process. The aim of an investigation is find out the possibility of improving the tribological characteristics of the surface due to the rhenium alloying. The verification of the surface properties (tribological) concluded geometry measurements, microstructure observation, hardness tests and evaluation of wear resistance.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
K. Kobiela, K. Kobiela, I. Smolina, I. Smolina, R. Dziedzic, R. Dziedzic, P. Szymczyk, P. Szymczyk, T. Kurzynowski, T. Kurzynowski, E. Chlebus, E. Chlebus, } "The process development of laser surface modification of commercially pure titanium (Grade 2) with rhenium", Proc. SPIE 10159, Laser Technology 2016: Progress and Applications of Lasers, 101590S (8 December 2016); doi: 10.1117/12.2262087; https://doi.org/10.1117/12.2262087
PROCEEDINGS
13 PAGES


SHARE
RELATED CONTENT

Optimization of a tribological properties of friction pairs
Proceedings of SPIE (November 13 2003)
Laser hardening of iron-base alloys
Proceedings of SPIE (October 02 1997)
Laser cladding
Proceedings of SPIE (November 13 2003)

Back to Top