17 April 2017 Fabrication of multilayered conductive polymer structures via selective visible light photopolymerization
Author Affiliations +
Abstract
Electropolymerization of pyrrole is commonly employed to fabricate intrinsically conductive polymer films that exhibit desirable electromechanical properties. Due to their monolithic nature, electroactive polypyrrole films produced via this process are typically limited to simple linear or bending actuation modes, which has hindered their application in complex actuation tasks. This initiative aims to develop the specialized fabrication methods and polymer formulations required to realize three-dimensional conductive polymer structures capable of more elaborate actuation modes.

Our group has previously reported the application of the digital light processing additive manufacturing process for the fabrication of three-dimensional conductive polymer structures using ultraviolet radiation. In this investigation, we further expand upon this initial work and present an improved polymer formulation designed for digital light processing additive manufacturing using visible light. This technology enables the design of novel electroactive polymer sensors and actuators with enhanced capabilities and brings us one step closer to realizing more advanced electroactive polymer enabled devices.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Andrew T. Cullen, Andrew T. Cullen, Aaron D. Price, Aaron D. Price, } "Fabrication of multilayered conductive polymer structures via selective visible light photopolymerization", Proc. SPIE 10163, Electroactive Polymer Actuators and Devices (EAPAD) 2017, 101632N (17 April 2017); doi: 10.1117/12.2260350; https://doi.org/10.1117/12.2260350
PROCEEDINGS
7 PAGES


SHARE
Back to Top