12 April 2017 Detection and assessment of flaws in friction stir welded metallic plates
Author Affiliations +
Abstract
Investigated is the ability of ultrasonic guided waves to detect flaws and assess the quality of friction stir welds (FSW). AZ31B magnesium plates were friction stir welded. While process parameters of spindle speed and tool feed were fixed, shoulder penetration depth was varied resulting in welds of varying quality.

Ultrasonic waves were excited at different frequencies using piezoelectric wafers and the fundamental symmetric (S0) mode was selected to detect the flaws resulting from the welding process. The front of the first transmitted wave signal was used to capture the S0 mode. A damage index (DI) measure was defined based on the amplitude attenuation after wave interaction with the welded zone. Computed Tomography (CT) scanning was employed as a nondestructive testing (NDT) technique to assess the actual weld quality. Derived DI values were plotted against CT-derived flaw volume resulting in a perfectly linear fit. The proposed approach showed high sensitivity of the S0 mode to internal flaws within the weld. As such, this methodology bears great potential as a future predictive method for the evaluation of FSW weld quality.
Conference Presentation
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mohammad Ali Fakih, Mohammad Ali Fakih, Samir Mustapha, Samir Mustapha, Jaafar Tarraf, Jaafar Tarraf, Georges Ayoub, Georges Ayoub, Ramsey Hamade, Ramsey Hamade, } "Detection and assessment of flaws in friction stir welded metallic plates", Proc. SPIE 10168, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2017, 101682L (12 April 2017); doi: 10.1117/12.2258701; https://doi.org/10.1117/12.2258701
PROCEEDINGS
9 PAGES + PRESENTATION

SHARE
Back to Top