5 April 2017 Comparison of two novel types of sensor to monitor the strain of concrete in F-T tests
Author Affiliations +
Abstract
In order to monitor the strain of concrete caused by freeze-thaw (F-T) cycles, two novel types of white light interferometer (WLI) sensor are designed and tested. The first type of sensor is poured the whole saturated concrete cylinder which coiled optical fiber with epoxy for encapsulation, and the second type coat neutral silicone sealant on the surface of cylinder, where enwound with optical fiber only. Each of the type was conducted on two sensors, the sensor of the first type was named W-sensor, and the sensor of the second type was named S-sensor. The comparison of the two novel types of sensor was conducted based on the test results, and the test result showed that though all of the two types of sensor can monitor the variation of strain with the process of F-T cycles, however, the type of S-sensor is more stability and reasonable.
Conference Presentation
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Haifeng Lv, Haifeng Lv, Kaixing Liao, Kaixing Liao, Xianglong Kong, Xianglong Kong, Shengyuan Li, Shengyuan Li, Yanbing Ding, Yanbing Ding, Changsen Sun, Changsen Sun, Xuefeng Zhao, Xuefeng Zhao, } "Comparison of two novel types of sensor to monitor the strain of concrete in F-T tests", Proc. SPIE 10170, Health Monitoring of Structural and Biological Systems 2017, 101702S (5 April 2017); doi: 10.1117/12.2259749; https://doi.org/10.1117/12.2259749
PROCEEDINGS
6 PAGES + PRESENTATION

SHARE
Back to Top