12 May 2017 Material removal during double-pulsed (ms and ns) laser drilling
Author Affiliations +
Proceedings Volume 10173, Fourth International Symposium on Laser Interaction with Matter; 1017324 (2017) https://doi.org/10.1117/12.2268314
Event: 4th International Symposium on Laser Interaction with Matter, 2016, Chengdu, China
Abstract
Laser drilling is one of the processing approaches in aerospace industry. However, drilling with ms laser is unstable since the drilled hole is easy to be blocked by re-solidified molten material. To solve this problem, two different pulsed lasers (millisecond and nanosecond) are used in our experiments. The shock wave produced by the ns laser is introduced to increase the migration mass. With the help of shock wave, the depth and quality of the hole get higher. The influences of the interval time, the ms laser energy and the laser pulse duration time on the quality of drilled holes are also discussed. The results show that the hole is deep and clean if the ns laser is added shortly after the beginning of ms laser. The ms laser energy and the laser duration time determine the depth of the hole.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zicheng Wang, Zicheng Wang, Yuan Qin, Yuan Qin, Sen Yang, Sen Yang, Bang Shi, Bang Shi, Heming Wang, Heming Wang, Hanyu Chen, Hanyu Chen, } "Material removal during double-pulsed (ms and ns) laser drilling", Proc. SPIE 10173, Fourth International Symposium on Laser Interaction with Matter, 1017324 (12 May 2017); doi: 10.1117/12.2268314; https://doi.org/10.1117/12.2268314
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT


Back to Top