22 December 2016 Graphene photoconductors fabricated on the substrates with different resistivity
Author Affiliations +
Proceedings Volume 10175, Electron Technology Conference 2016; 101751B (2016) https://doi.org/10.1117/12.2260493
Event: Electron Technology Conference ELTE 2016, 2016, Wisla, Poland
In this paper, the results of the initial work on determining the photoelectric properties of graphene detector operating in a photoconductive mode are presented. Graphene is considered as a material for uncooled fast detectors. The investigation has been done by electrical and optical characterization. Two values of substrate resistivity have been used in the project – below 1 Ωcm and higher than 1.6 kΩcm. Measurements of detectors response to short, strong light pulses were conducted. Presented studies show that the use of high resistivity substrates is necessary to prevent capacitive shorting of the signal to the substrate, causing signal losses and increasing response time.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lukasz Ruta, Lukasz Ruta, Janusz Wozny, Janusz Wozny, Zbigniew Lisik, Zbigniew Lisik, Jacek Podgorski, Jacek Podgorski, Jozef Piotrowski, Jozef Piotrowski, Jaroslaw Pawluczyk, Jaroslaw Pawluczyk, Dawid Stepien, Dawid Stepien, Klaudia Zeranska, Klaudia Zeranska, } "Graphene photoconductors fabricated on the substrates with different resistivity ", Proc. SPIE 10175, Electron Technology Conference 2016, 101751B (22 December 2016); doi: 10.1117/12.2260493; https://doi.org/10.1117/12.2260493

Back to Top