5 May 2017 Development of a miniature Stirling cryocooler for LWIR small satellite applications
Author Affiliations +
Abstract
The optimum small satellite (SmallSat) cryocooler system must be extremely compact and lightweight, achieved in this paper by operating a linear cryocooler at a frequency of approximately 300 Hz. Operation at this frequency, which is well in excess of the 100-150 Hz reported in recent papers on related efforts, requires an evolution beyond the traditional Oxford-class, flexure-based methods of setting the mechanical resonance. A novel approach that optimizes the electromagnetic design and the mechanical design together to simultaneously achieve the required dynamic and thermodynamic performances is described. Since highly miniaturized pulse tube coolers are fundamentally ill-suited for the sub-80K temperature range of interest because the boundary layer losses inside the pulse tube become dominant at the associated very small pulse tube size, a moving displacer Stirling cryocooler architecture is used. Compact compressor mechanisms developed on a previous program are reused for this design, and they have been adapted to yield an extremely compact Stirling warm end motor mechanism. Supporting thermodynamic and electromagnetic analysis results are reported.
Conference Presentation
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
C. S. Kirkconnell, C. S. Kirkconnell, R. C. Hon, R. C. Hon, M. D. Perella, M. D. Perella, T. M. Crittenden, T. M. Crittenden, S. M. Ghiaasiaan, S. M. Ghiaasiaan, } "Development of a miniature Stirling cryocooler for LWIR small satellite applications", Proc. SPIE 10180, Tri-Technology Device Refrigeration (TTDR) II, 1018002 (5 May 2017); doi: 10.1117/12.2259803; https://doi.org/10.1117/12.2259803
PROCEEDINGS
13 PAGES + PRESENTATION

SHARE
Back to Top