1 May 2017 Design and analysis of a multi-passband complex filter for the multiband cognitive radar system
Author Affiliations +
Abstract
Multiband cognitive radar systems, operating in a variety of frequency bands and combining the different channels into a joint system, can provide significant flexibility and capability to detect and track hostile targets. This paper proposes a multi-passband complex filter (MPCF) architecture and the related circuit design for a multiband cognitive radar system. By operating under the 5.8GHz UNII band, the sensing part detects the current usage of frequency bands from 5.15GHz to 5.825GHz and provides the information of unused channels. The multiband cognitive radar system uses the whole unused channels and eliminates the used channels by using an on-chip MPCF in order to be coexistent with the Wi-Fi standard. The MPCF filters out the unwanted channels and leave the wanted channels. It dynamically changes the bandwidth of frequency from 20MHz to 80MHz using the 0.18μm CMOS technology. The MPCF is composed of the combination of 5th-order Chebyshev low-pass filters and high-pass filters, and the overall inband ripple of the MPCF is 1.2dB. The consuming current is 21.7mA at 1.8V power supply and the 20MHz bandwidth noise is 55.5nV. The total harmonic distortion (THD) is 45dB at 25MHz and the adjacent channel rejection is 24dB. The result of the MPCF guarantees the performance requirements of the multiband cognitive radar system.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hua-Chin Lee, Hua-Chin Lee, Der-Hong Ting, Der-Hong Ting, Ya-Lan Tsao, Ya-Lan Tsao, } "Design and analysis of a multi-passband complex filter for the multiband cognitive radar system", Proc. SPIE 10188, Radar Sensor Technology XXI, 101881L (1 May 2017); doi: 10.1117/12.2269070; https://doi.org/10.1117/12.2269070
PROCEEDINGS
7 PAGES


SHARE
Back to Top