5 May 2017 Thermal inspection of a composite fuselage section using a fixed eigenvector principal component analysis method
Author Affiliations +
Abstract
A composite fuselage aircraft forward section was inspected with flash thermography. The fuselage section is 24 feet long and approximately 8 feet in diameter. The structure is primarily configured with a composite sandwich structure of carbon fiber face sheets with a Nomex® honeycomb core. The outer surface area was inspected. The thermal data consisted of 477 data sets totaling in size of over 227 Gigabytes. Principal component analysis (PCA) was used to process the data sets for substructure and defect detection. A fixed eigenvector approach using a global covariance matrix was used and compared to a varying eigenvector approach. The fixed eigenvector approach was demonstrated to be a practical analysis method for the detection and interpretation of various defects such as paint thickness variation, possible water intrusion damage, and delamination damage. In addition, inspection considerations are discussed including coordinate system layout, manipulation of the fuselage section, and the manual scanning technique used for full coverage.
Conference Presentation
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Joseph N. Zalameda, Joseph N. Zalameda, Sean Bolduc, Sean Bolduc, Rebecca Harman, Rebecca Harman, } "Thermal inspection of a composite fuselage section using a fixed eigenvector principal component analysis method", Proc. SPIE 10214, Thermosense: Thermal Infrared Applications XXXIX, 102140H (5 May 2017); doi: 10.1117/12.2264093; https://doi.org/10.1117/12.2264093
PROCEEDINGS
8 PAGES + PRESENTATION

SHARE
Back to Top