8 February 2017 The stress analysis and tests in the bottom of the hinge beam block of cubic press
Author Affiliations +
Proceedings Volume 10253, 2016 International Conference on Robotics and Machine Vision; 102530K (2017) https://doi.org/10.1117/12.2266339
Event: 2016 International Conference on Robotics and Machine Vision, 2016, Moscow, Russia
Abstract
To deal with the problems of the local stress concentration caused by the internal hydraulic pressure during the operation of cubic press, we have used the theory of thick-wall block to analyze and calculate the loads of the hinge beam block. The results demonstrate that the working block suffering from the excessive hydraulic pressure contacts with the bottom of hinge beam each other, which gives rise to the stress concentration in the arc of the bottom of the hinge beam block. According to the data of the theoretical calculation, the strain tests of the arc are completed by the strain testing methods in the bottom of the hinge beam block. The Comparison between the data of the two groups has verified their consistency. It also confirms the theoretical calculation is reasonable and accurate at the same time.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Liang Ma, Liang Ma, Xianglong Ma, Xianglong Ma, Yuan Yuan, Yuan Yuan, Yinghong Zhang, Yinghong Zhang, "The stress analysis and tests in the bottom of the hinge beam block of cubic press", Proc. SPIE 10253, 2016 International Conference on Robotics and Machine Vision, 102530K (8 February 2017); doi: 10.1117/12.2266339; https://doi.org/10.1117/12.2266339
PROCEEDINGS
5 PAGES


SHARE
Back to Top