8 March 2017 No scanning depth imaging system based on TOF
Author Affiliations +
Proceedings Volume 10255, Selected Papers of the Chinese Society for Optical Engineering Conferences held October and November 2016; 102554W (2017) https://doi.org/10.1117/12.2268509
Event: Selected Papers of the Chinese Society for Optical Engineering Conferences held October and November 2016, 2016, Jinhua, Suzhou, Chengdu, Xi'an, Wuxi, China
Abstract
To quickly obtain a 3D model of real world objects, multi-point ranging is very important. However, the traditional measuring method usually adopts the principle of point by point or line by line measurement, which is too slow and of poor efficiency. In the paper, a no scanning depth imaging system based on TOF (time of flight) was proposed. The system is composed of light source circuit, special infrared image sensor module, processor and controller of image data, data cache circuit, communication circuit, and so on. According to the working principle of the TOF measurement, image sequence was collected by the high-speed CMOS sensor, and the distance information was obtained by identifying phase difference, and the amplitude image was also calculated. Experiments were conducted and the experimental results show that the depth imaging system can achieve no scanning depth imaging function with good performance.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Rongchun Sun, Rongchun Sun, Yan Piao, Yan Piao, Yu Wang, Yu Wang, Shuo Liu, Shuo Liu, } "No scanning depth imaging system based on TOF", Proc. SPIE 10255, Selected Papers of the Chinese Society for Optical Engineering Conferences held October and November 2016, 102554W (8 March 2017); doi: 10.1117/12.2268509; https://doi.org/10.1117/12.2268509
PROCEEDINGS
5 PAGES


SHARE
Back to Top