28 February 2017 Study of thin film thickness measurement based on white light interference
Author Affiliations +
Proceedings Volume 10256, Second International Conference on Photonics and Optical Engineering; 102562D (2017) https://doi.org/10.1117/12.2257412
Event: Second International Conference on Photonics and Optical Engineering, 2016, Xi'an, China
Abstract
One method for measuring thin film thickness was proposed in this paper, which based on white light interference. One parallel flat crystal was used to be the standard glass, and put another glass on it, to form one air wedge between them. The reflectance spectrum of two beams interference was measured by one spectrometer. By fitting the reflectance spectrum, wave numbers corresponding to every peak can be found, then using two beam interference theory, the air gap thickness at light incident point can be fitted. By measuring the air gap thickness at different positions, the flatness of measured surface also can be analyzed.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yuanbo Zheng, Yuanbo Zheng, Chunxiao Chu, Chunxiao Chu, Xia Wang, Xia Wang, } "Study of thin film thickness measurement based on white light interference", Proc. SPIE 10256, Second International Conference on Photonics and Optical Engineering, 102562D (28 February 2017); doi: 10.1117/12.2257412; https://doi.org/10.1117/12.2257412
PROCEEDINGS
7 PAGES


SHARE
Back to Top