28 February 2017 The design of fiber-based 4-LP mode multi/demultiplexer
Author Affiliations +
Proceedings Volume 10256, Second International Conference on Photonics and Optical Engineering; 102563M (2017) https://doi.org/10.1117/12.2257833
Event: Second International Conference on Photonics and Optical Engineering, 2016, Xi'an, China
We propose a fiber-based 4-LP mode (LP01, LP11, LP21 and LP02) multi/demultiplexer, which excites or separates 4-LP mode simultaneously in the integrated structure of a single optical fiber. The structure contains a 4-mode transmitting core in the center of the fiber and the other three multi/demulitplexing parts (consist of a coupling core and several assistant cores or not) which are deployed around the transmitting core with 120 degrees between each other.

The design of the fiber-based 4-LP mode multi/demultiplexer includes the following parts. Firstly, the appropriate distance between the transmitting core and the surrounding parts are below 15μm, 12μm and 10μm for multi/demultiplexing of LP11, LP21 and LP02 mode, respectively, which can guarantee the coupling loss is less than 2%. Then we design the structural parameters (core diameter and refractive index) of single-mode coupling cores to achieve phase matching between LP01 (single-mode coupling cores) and LP11, LP21, LP02 (transmitting core), respectively. The appropriate core diameter and refractive index for the coupling cores of the multi/demultiplexing parts are 5μm and 1.465703 (LP01-LP11), 2μm and 1.479793 (LP01-LP21), 1.5μm and 1.488404 (LP01-LP02), respectively, all of which can ensure that the coupling efficiency are more than 90% in the C+L band. Afterwards, by discussing the coupling crosstalk of each multi/demultiplexing part, we find that LP02-LP01 mode multi/demultiplexing part does not need any assistant core, LP21-LP01 and LP11-LP01 mode multi/multiplexing parts need to add 1 or 2 assistant single mode core as required to decrease the coupling crosstalk. Finally by adjusting the relative position of the three multi/demultiplexing parts and the transmitting core (ensure the performance of the whole system is not affected), we can ensure that the 4 mode can be multi/demultiplexed at the same time.

Above all, we put forward a fiber-based 4-LP-mode multi/demultiplexer which excites or separates 4-LP mode simultaneously with high multi/demultiplexing efficiency, low coupling loss, and low coupling crosstalk.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Huan Zhang, Huan Zhang, Jiajing Tu, Jiajing Tu, Keping Long, Keping Long, } "The design of fiber-based 4-LP mode multi/demultiplexer", Proc. SPIE 10256, Second International Conference on Photonics and Optical Engineering, 102563M (28 February 2017); doi: 10.1117/12.2257833; https://doi.org/10.1117/12.2257833

Back to Top