Paper
20 June 1989 European Activities And Approaches To High Power Laser Technology
Alberto Sona
Author Affiliations +
Proceedings Volume 1031, 7th Intl Symp on Gas Flow and Chemical Lasers; (1989) https://doi.org/10.1117/12.950493
Event: 7th International Symposium on Gas Flow and Chemical Lasers, 1988, Vienna, Austria
Abstract
By the end of 85 the Eureka "Eurolaser EU6" Project was started with a definition phase aimed at the generation of specific proposals in the field of High Power Lasers for materials processing. A number of industrial initiatives followed, leading to the definition of specific Eureka Projects in the areas of High Power CO2 Lasers (10 ÷ 100 kW), High Power Solid State Lasers (1 ÷ 5 kW) and High Power Excimers Lasers (up to 10 kW). A review will be given of the Eurolaser Projects originated in two years in the above areas and of possible additional projects considering other approaches to high power lasers. Other precompetitive European or national initiatives will be reviewed. The Eureka projects on laser processing at power levels lower than the Eurolaser ones will be also mentioned. Proposals for an additional coordination, possibly leading to Common European Standards on laser beams characterisation and quality assessment procedures, on mechanical and optical components for high power lasers and laser systems and on laser safety regulations, will also be outlined.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alberto Sona "European Activities And Approaches To High Power Laser Technology", Proc. SPIE 1031, 7th Intl Symp on Gas Flow and Chemical Lasers, (20 June 1989); https://doi.org/10.1117/12.950493
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical fibers

High power lasers

Carbon dioxide lasers

Pulsed laser operation

Gas lasers

Excimer lasers

Refraction

RELATED CONTENT

High-power CO lasers for materials processing
Proceedings of SPIE (August 16 1994)
High Power Lasers For Materials Processing
Proceedings of SPIE (May 18 1989)
Eureka:Eurolaser
Proceedings of SPIE (March 24 1989)

Back to Top