23 January 2017 An analytical method for prediction of stability lobes diagram of milling of large-size thin-walled workpiece
Author Affiliations +
Proceedings Volume 10322, Seventh International Conference on Electronics and Information Engineering; 1032216 (2017) https://doi.org/10.1117/12.2268395
Event: Seventh International Conference on Electronics and Information Engineering, 2016, Nanjing, China
Abstract
Different from common thin-walled workpiece, in the process of milling of large-size thin-walled workpiece chatter in the axial direction along the spindle is also likely to happen because of the low stiffness of the workpiece in this direction. An analytical method for prediction of stability lobes of milling of large-size thin-walled workpiece is presented in this paper. In the method, not only frequency response function of the tool point but also frequency response function of the workpiece is considered.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jiming Yao, Bin Lin, Yu Guo, "An analytical method for prediction of stability lobes diagram of milling of large-size thin-walled workpiece", Proc. SPIE 10322, Seventh International Conference on Electronics and Information Engineering, 1032216 (23 January 2017); doi: 10.1117/12.2268395; https://doi.org/10.1117/12.2268395
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT


Back to Top