23 January 2017 Analysis and control on changeable wheel tool system of hybrid grinding and polishing machine tool for blade finishing
Author Affiliations +
Proceedings Volume 10322, Seventh International Conference on Electronics and Information Engineering; 103222X (2017) https://doi.org/10.1117/12.2265328
Event: Seventh International Conference on Electronics and Information Engineering, 2016, Nanjing, China
Abstract
Blade is the key component in the energy power equipment of turbine, aircraft engines and so on. Researches on the process and equipment for blade finishing become one of important and difficult point. To control precisely tool system of developed hybrid grinding and polishing machine tool for blade finishing, the tool system with changeable wheel for belt polishing is analyzed in this paper. Firstly, the belt length and wrap angle of each wheel in different position of tension wheel swing angle in the process of changing wheel is analyzed. The reasonable belt length is calculated by using MATLAB, and relationships between wrap angle of each wheel and cylinder expansion amount of contact wheel are obtained. Then, the control system for changeable wheel tool structure is developed. Lastly, the surface roughness of blade finishing is verified by experiments. Theoretical analysis and experimental results show that reasonable belt length and wheel wrap angle can be obtained by proposed analysis method, the changeable wheel tool system can be controlled precisely, and the surface roughness of blade after grinding meets the design requirements.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Qiuwei He, Xingming Lv, Xin Wang, Xingtian Qu, Ji Zhao, "Analysis and control on changeable wheel tool system of hybrid grinding and polishing machine tool for blade finishing", Proc. SPIE 10322, Seventh International Conference on Electronics and Information Engineering, 103222X (23 January 2017); doi: 10.1117/12.2265328; https://doi.org/10.1117/12.2265328
PROCEEDINGS
8 PAGES


SHARE
Back to Top