23 January 2017 Evaluation of the sensing block method for dynamic force measurement
Author Affiliations +
Proceedings Volume 10322, Seventh International Conference on Electronics and Information Engineering; 1032237 (2017) https://doi.org/10.1117/12.2265156
Event: Seventh International Conference on Electronics and Information Engineering, 2016, Nanjing, China
Abstract
Sensing block method was proposed for the dynamic force measurement by Tanimura et al. in 1994. Comparing with the Split Hopkinson pressure bar (SHPB) technique, it can provide a much longer measuring time for the dynamic properties test of materials. However, the signals recorded by sensing block are always accompanied with additional oscillations. Tanimura et al. discussed the effect of force rising edge on the test results, whereas more research is still needed. In this paper, some more dominant factors have been extracted through dimensional analysis. The finite element simulation has been performed to assess these factors. Base on the analysis and simulation, some valuable results are obtained and some criterions proposed in this paper can be applied in design or selection of the sensing block.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Qinghui Zhang, Qinghui Zhang, Hao Chen, Hao Chen, Wenzhao Li, Wenzhao Li, Li Song, Li Song, } "Evaluation of the sensing block method for dynamic force measurement", Proc. SPIE 10322, Seventh International Conference on Electronics and Information Engineering, 1032237 (23 January 2017); doi: 10.1117/12.2265156; https://doi.org/10.1117/12.2265156
PROCEEDINGS
7 PAGES


SHARE
Back to Top