23 January 2017 Research on large-scale wind farm modeling
Author Affiliations +
Proceedings Volume 10322, Seventh International Conference on Electronics and Information Engineering; 103223F (2017) https://doi.org/10.1117/12.2265492
Event: Seventh International Conference on Electronics and Information Engineering, 2016, Nanjing, China
Due to intermittent and adulatory properties of wind energy, when large-scale wind farm connected to the grid, it will have much impact on the power system, which is different from traditional power plants. Therefore it is necessary to establish an effective wind farm model to simulate and analyze the influence wind farms have on the grid as well as the transient characteristics of the wind turbines when the grid is at fault. However we must first establish an effective WTGs model. As the doubly-fed VSCF wind turbine has become the mainstream wind turbine model currently, this article first investigates the research progress of doubly-fed VSCF wind turbine, and then describes the detailed building process of the model. After that investigating the common wind farm modeling methods and pointing out the problems encountered. As WAMS is widely used in the power system, which makes online parameter identification of the wind farm model based on off-output characteristics of wind farm be possible, with a focus on interpretation of the new idea of identification-based modeling of large wind farms, which can be realized by two concrete methods.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Longfei Ma, Longfei Ma, Baoqun Zhang, Baoqun Zhang, Cheng Gong, Cheng Gong, Ran Jiao, Ran Jiao, Rui Shi, Rui Shi, Zhongjun Chi, Zhongjun Chi, Yifeng Ding, Yifeng Ding, } "Research on large-scale wind farm modeling", Proc. SPIE 10322, Seventh International Conference on Electronics and Information Engineering, 103223F (23 January 2017); doi: 10.1117/12.2265492; https://doi.org/10.1117/12.2265492

Back to Top