23 January 2017 Precision holding prediction model for moving joint surfaces of large machine tool
Author Affiliations +
Proceedings Volume 10322, Seventh International Conference on Electronics and Information Engineering; 103224I (2017) https://doi.org/10.1117/12.2265308
Event: Seventh International Conference on Electronics and Information Engineering, 2016, Nanjing, China
Abstract
In large machine tool, the plastic guide rail is more and more widely used because of its good mechanical properties. Based on the actual operating conditions of the machine tool, this paper analyzes the precision holding performance of the main bearing surface of the large machine tool with plastic guide rail moving. The precision holding performance of the plastic sliding guide rail is studied in detail from several aspects, such as the lubrication condition, the operating parameters of the machine tool and the material properties. The precision holding model of the moving binding surface of the plastic coated guide rail is established. At the same time, the experimental research on the accuracy of the guide rail is carried out, which verifies the validity of the theoretical model.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mulan Wang, Mulan Wang, Xuanyu Chen, Xuanyu Chen, Wenzheng Ding, Wenzheng Ding, Kaiyun Xu, Kaiyun Xu, } "Precision holding prediction model for moving joint surfaces of large machine tool", Proc. SPIE 10322, Seventh International Conference on Electronics and Information Engineering, 103224I (23 January 2017); doi: 10.1117/12.2265308; https://doi.org/10.1117/12.2265308
PROCEEDINGS
5 PAGES


SHARE
Back to Top