Monitoring the fabrication of tapered optical fibres

K. Mullaney; R. Correia; S. E. Staines; S. W. James; R. P. Tatam

doi:10.1117/12.2263285

23 April 2017 Monitoring the fabrication of tapered optical fibres

K. Mullaney, R. Correia, S. E. Staines, S. W. James, R. P. Tatam

Author Affiliations +

Proceedings Volume 10323, 25th International Conference on Optical Fiber Sensors; 103232D (2017) https://doi.org/10.1117/12.2263285
Event: 25th International Conference on Optical Fiber Sensors, 2017, Jeju, Korea, Republic of

Abstract

A variety of optical methods to enhance the process of making optical fibre tapers are explored. A thermal camera was used to both refine the alignment of the optical components and optimize the laser power profile during the tapering process. The fibre transmission was measured to verify that the tapers had the requisite optical characteristics while the strain experienced by the fibre while tapering was assessed using an optical fibre Bragg grating. Using these techniques, adiabatic tapers were fabricated with a 2% insertion loss.

Citation Download Citation

K. Mullaney, R. Correia, S. E. Staines, S. W. James, and R. P. Tatam "Monitoring the fabrication of tapered optical fibres", Proc. SPIE 10323, 25th International Conference on Optical Fiber Sensors, 103232D (23 April 2017); https://doi.org/10.1117/12.2263285

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE