23 April 2017 Fiber interferometer combining sub-nm displacement resolution with miniaturized sensor head
Author Affiliations +
Proceedings Volume 10323, 25th International Conference on Optical Fiber Sensors; 1032380 (2017) https://doi.org/10.1117/12.2265441
Event: 25th International Conference on Optical Fiber Sensors, 2017, Jeju, Korea, Republic of
Abstract
The presented interferometer concept enables high-accuracy target displacement measurement in difficult accessible locations and the development of small fiber optic sensor to measure other physical parameters e.g. pressure, vibration, gravity force, etc.. Furthermore, this configuration is basically insensitive to disturbances to the lead fiber between the passive sensor head and the measurement system including the electro-optical parts and the detection interferometer. Two test setups are built and tested to demonstrate the feasibility of high-speed measurement up to 50 kHz, low system drift of ~0.5 nm over 500 s and a low displacement noise level down to 2.8 pm/√ Hz.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lun-Kai Cheng, Lun-Kai Cheng, Ronald A. J. Hagen, Ronald A. J. Hagen, Lodi N. Schriek, Lodi N. Schriek, Peter M. Toet, Peter M. Toet, Oana E. Van der Togt, Oana E. Van der Togt, } "Fiber interferometer combining sub-nm displacement resolution with miniaturized sensor head", Proc. SPIE 10323, 25th International Conference on Optical Fiber Sensors, 1032380 (23 April 2017); doi: 10.1117/12.2265441; https://doi.org/10.1117/12.2265441
PROCEEDINGS
4 PAGES


SHARE
Back to Top