15 June 2017 Automated surface quality inspection with ARGOS: a case study
Author Affiliations +
Proceedings Volume 10326, Fourth European Seminar on Precision Optics Manufacturing; 103260T (2017) https://doi.org/10.1117/12.2275232
Event: Fourth European Seminar on Precision Optics Manufacturing, 2017, Teisnach, Germany
Abstract
The commercial availability of automated inspection systems for optical surfaces specified according to ISO 10110-7 promises unsupervised and automated quality control with reproducible results. In this study, the classification results of the ARGOS inspection system are compared to the decisions by well-trained inspectors based on manual-visual inspection. Both are found to agree in 93.6% of the studied cases. Exemplary cases with differing results are studied, and shown to be partly caused by shortcomings of the ISO 10110-7 standard, which was written for the industry standard manual-visual inspection. Applying it to high resolution images of the whole surface of objective machine vision systems brings with it a few challenges which are discussed.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Daniel Kiefhaber, Daniel Kiefhaber, Fabian Etzold, Fabian Etzold, Arno F. Warken, Arno F. Warken, Jean-Michel Asfour, Jean-Michel Asfour, } "Automated surface quality inspection with ARGOS: a case study", Proc. SPIE 10326, Fourth European Seminar on Precision Optics Manufacturing, 103260T (15 June 2017); doi: 10.1117/12.2275232; https://doi.org/10.1117/12.2275232
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT

Design of an aid to visual inspection workstation
Proceedings of SPIE (May 19 2016)
Automatic Visual Inspection System For IC Bonding Wires
Proceedings of SPIE (July 18 1988)
Chip-Bond Process Control with Computer Vision
Proceedings of SPIE (February 01 1990)
Vision Guided X-Y Table For Inspection
Proceedings of SPIE (May 23 1983)
Optics In Automated Inspection
Proceedings of SPIE (October 20 1975)

Back to Top