29 August 2017 Performance stability of reflection-mode AlGaN photocathode under different preparation methods
Author Affiliations +
Abstract
To research the attenuation performance of the AlGaN photocathode, three samples with same structures grown by metalorganic chemical vapor deposition (MOCVD) were activated with three different activation methods, which are Cs-only, Cs-O and Cs-O-Cs activation, respectively. The spectral responses and attenuated photocurrents of three AlGaN photocathodes were measured, the result shows that the Cs-O activated AlGaN photocathode have the lowest attenuation speed in the first few hours, the next are Cs-O-Cs and Cs-only activation, respectively. After the Cs-O-Cs activation sample has attenuated 90 min, its attenuation photocurrent curve is coincident with the Cs-O activation sample in the next measurement. The main factor which affects the photocurrent attenuation is Cs atom desorbed from the photocathodes surface.
Conference Presentation
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Guanghui Hao, Junju Zhang, Yijun Zhang, Yafeng Qiu, Yunsheng Qian, "Performance stability of reflection-mode AlGaN photocathode under different preparation methods", Proc. SPIE 10351, UV and Higher Energy Photonics: From Materials to Applications 2017, 1035107 (29 August 2017); doi: 10.1117/12.2273319; https://doi.org/10.1117/12.2273319
PROCEEDINGS
10 PAGES + PRESENTATION

SHARE
RELATED CONTENT

Heterostructure HgCdTe photovoltaic detectors
Proceedings of SPIE (February 22 2001)
Chemical Imaging With X-Ray Scatter
Proceedings of SPIE (January 01 1986)
Uncooled long-wavelength infrared photon detectors
Proceedings of SPIE (July 06 2004)

Back to Top