1 May 1989 Calibration Of Captive 9700 Illuminators
Author Affiliations +
Proceedings Volume 1036, Precision Instrument Design; (1989) https://doi.org/10.1117/12.950996
Event: SPIE Advanced Processing Technologies for Optical and Electronic Devices (colocated wth OPTCON), 1988, Santa Clara, CA, United States
Abstract
This paper outlines the problem, and describes the solution, of developing a means of measuring the beam position of captive production illuminators to allow their use as tooling alignment light sources. The Xerox 9700 Laser Printer, which has a throughput of 120 pages per minute, uses a 25mw argon ion laser as its light source. The laser printer optical assembly is split into two units. 1. The illuminator consists of the laser, beam conditioning optics, modulator, and beam pointing mirrors. This unit is removable from the second half, and is field replaceable. 2. The scanning laser output terminal (SLOT) consisting of the motor polygon assembly, scanning optics, mirrors, scan line detectors, and exit window is a permanently attached assembly to the printing engine frame. The illuminator and slot assemblies are manufactured in two different locations, and the slot is optically aligned utilizing a captive illuminator as a tooling light source. The beam pointing tolerances of the captive tooling illuminators are set to tighter limits than normal production units. In order to align the beam exiting the illuminator, a tool was designed and built which is self-calibrating and has been demonstrated to measure the beam position to an accuracy of 0.0001 an inch, which is sufficient to allow adjustment and verification of the tooling illuminators, reference Figures 1 and 2.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Richard J. Wizenick, Richard J. Wizenick, } "Calibration Of Captive 9700 Illuminators", Proc. SPIE 1036, Precision Instrument Design, (1 May 1989); doi: 10.1117/12.950996; https://doi.org/10.1117/12.950996
PROCEEDINGS
4 PAGES


SHARE
RELATED CONTENT

The Photoelectric Spectroheliometer On ATM
Proceedings of SPIE (September 01 1974)
Improved Earth Resources Sensing Instrument
Proceedings of SPIE (November 23 1982)
Status of the GRAAL system development very wide field...
Proceedings of SPIE (September 13 2012)

Back to Top