Paper
23 August 2017 Model development of degradation of PV modules backsheet with locating place of module
Yu Wang, Andrew Fairbrother, Sebastien Merzlic, Scott Julien, Lucas S. Fridman, Camille Loyer, Amy L. Lefebvre, Gregory O'Brien, Xiaohong Gu, Liang Ji, Kenneth P. Boyce, Michael Kempe, Kai-tak Wan, Roger H. French, Laura S. Bruckman
Author Affiliations +
Abstract
Performance of a photovoltaic (PV) module is related to the micro-environment around the module. The position of photovoltaic modules in an array row have a large effect on the yellowing and gloss of PV module backsheet exposed in Dfa climatic zone (Gaithersburg, MD) with a polyethylene naphthalate (PEN) outer layer. <Stress/ Response< models of yellowing and gloss-losing as function of location parameters of module, including the shed, row, measurement position in a same module and the distance of module location to the row center, are under development. The module installation height had the greatest influence on degradation of PEN PV backsheet in the Dfa climatic zone. The module backsheets at the end of an array have higher degradation rate (edge effect). The edge effect decreases with increasing of module installation heights.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yu Wang, Andrew Fairbrother, Sebastien Merzlic, Scott Julien, Lucas S. Fridman, Camille Loyer, Amy L. Lefebvre, Gregory O'Brien, Xiaohong Gu, Liang Ji, Kenneth P. Boyce, Michael Kempe, Kai-tak Wan, Roger H. French, and Laura S. Bruckman "Model development of degradation of PV modules backsheet with locating place of module", Proc. SPIE 10370, Reliability of Photovoltaic Cells, Modules, Components, and Systems X, 103700L (23 August 2017); https://doi.org/10.1117/12.2274209
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Solar cells

Climatology

FT-IR spectroscopy

Humidity

Photovoltaics

Positron emission tomography

Spectroscopy

Back to Top