23 August 2017 Mask in thickness uniformity for three coating materials
Author Affiliations +
In this study, a mask suitable for three materials evaporated from one single e-beam source is developed to obtain uniform thickness distribution. The design method is based on film thickness theory and the assumption that a substrate holder rotates about its central axis during the deposition of films. The uniform thickness distributions of the SiO2, TiO2 and Ag films deposited with the designed mask are achieved in an e-beam evaporation chamber. The design of a mask in thickness uniformity for three coating materials cuts the development time and requires less trial and error than traditionally experimental correction loops.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Cheng-Chung Jaing, Cheng-Chung Jaing, Kai-Lun Wu, Kai-Lun Wu, Jing-Han Xie, Jing-Han Xie, Jian-Wei Chen, Jian-Wei Chen, Yeuh-Yeong Liou, Yeuh-Yeong Liou, Pang-Shiu Chen, Pang-Shiu Chen, } "Mask in thickness uniformity for three coating materials", Proc. SPIE 10375, Current Developments in Lens Design and Optical Engineering XVIII, 1037511 (23 August 2017); doi: 10.1117/12.2273277; https://doi.org/10.1117/12.2273277


tesa ROM and tesa WORM multilayered optical data storage...
Proceedings of SPIE (September 08 2004)
Electrochromic multilayer device
Proceedings of SPIE (October 21 2003)
Systems Analysis Of Absorbing Media
Proceedings of SPIE (October 12 1986)

Back to Top