6 September 2017 Dome diagnostics system of optical parameters and characteristics of LEDs
Author Affiliations +
Abstract
Scientific and technological progress of recent years in the production of the light emitting diodes (LEDs) has led to the expansion of areas of their application from the simplest systems to high precision lighting devices used in various fields of human activity. However, development and production (especially mass production) of LED lighting devices are impossible without a thorough analysis of its parameters and characteristics. There are many ways and devices for analysis the spatial, energy and colorimetric parameters of LEDs. The most methods are intended for definition only one parameter (for example, luminous flux) or one characteristic (for example, the angular distribution of energy or the spectral characteristics). Besides, devices used these methods are intended for measuring parameters in only one point or plane. This problem can be solved by using a dome diagnostics system of optical parameters and characteristics of LEDs, developed by specialists of the department OEDS chair of ITMO University in Russia. The paper presents the theoretical aspects of the analysis of LED’s spatial (angular), energy and color parameters by using mentioned of diagnostics system. The article also presents the results of spatial), energy and color parameters measurements of some LEDs brands.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Vladimir S. Peretyagin, Nikita A. Pavlenko, "Dome diagnostics system of optical parameters and characteristics of LEDs", Proc. SPIE 10378, Sixteenth International Conference on Solid State Lighting and LED-based Illumination Systems, 103780Q (6 September 2017); doi: 10.1117/12.2275043; https://doi.org/10.1117/12.2275043
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT

Challenges and opportunities in LED based lighting
Proceedings of SPIE (May 31 2013)
Human preference in tunable solid state lighting
Proceedings of SPIE (February 09 2011)
Evaluating the junction temperature of AC LEDs by DC and...
Proceedings of SPIE (September 23 2011)
Concepts for future solid state lighting solutions
Proceedings of SPIE (August 18 2010)

Back to Top