30 August 2017 Development of a wing-beat-modulation scanning lidar system for insect studies
Author Affiliations +
Proceedings Volume 10406, Lidar Remote Sensing for Environmental Monitoring 2017; 104060G (2017); doi: 10.1117/12.2274656
Event: SPIE Optical Engineering + Applications, 2017, San Diego, California, United States
The spatial distributions of flying insects are not well understood since most sampling methods - Malaise traps, sticky traps, vacuum traps, light traps - are not suited to documenting movements or changing distributions of various insects on short time scales. These methods also capture and kill the insects. To noninvasively monitor the spatial distributions of flying insects, we developed and implemented a scanning lidar system that measured wing-beat-modulated scattered laser light. The oscillating signal from wing-beat returns allowed for reliable separation of lidar returns for insects and stationary objects. Transmitting and receiving optics were mounted to a telescope that was attached to a scanning mount. As it scanned, the lidar collected and analyzed the light scattered from insect wings of various species. Mount position and pulse time-of-flight determined spatial location and spectral analysis of the backscattered light provided clues to insect identity. During one day of a four-day field campaign at Grand Teton National Park in June of 2016, 76 very likely insects and 662 somewhat likely insects were detected, with a maximum range to the insect of 87.6 m for very likely insects
Conference Presentation
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Martin Jan Tauc, Kurt M. Fristrup, Joseph A. Shaw, "Development of a wing-beat-modulation scanning lidar system for insect studies", Proc. SPIE 10406, Lidar Remote Sensing for Environmental Monitoring 2017, 104060G (30 August 2017); doi: 10.1117/12.2274656; https://doi.org/10.1117/12.2274656



Light scattering



Back to Top