Built-up areas are the results of human activities. Not only are they the real reflection of human and society activities, but also one of the most important input parameters for the simulation of biogeochemical cycle. Therefore, it is very necessary to map the distribution of built-up areas and monitor their changes by using new technologies and methods at high spatiotemporal resolution. By combining technologies of GIS (Geographic Information System) and RS (Remote Sensing), this study mainly explored the expansion and driving factors of built-up areas at the beginning of the 21st century in Zhejiang Province, China. Firstly, it introduced the mapping processes of LULC (Land Use and Land Cover) based on the method which combined object-oriented method and binary decision tree. Then, it analyzed the expansion features of built-up areas in Zhejiang from 2000 to 2005 and 2005 to 2010. In addition to these, potential driving factors on the expansion of built-up areas were also explored, which contained physical geographical factors, railways, highways, rivers, urban centers, elevation, and slop. Results revealed that the expansions of built-up areas in Zhejiang from 2000 to 2005 and from 2005 to 2010 were very obvious and they showed high levels of variation in spatial heterogeneity. Except those, increased built-up areas with distance to railways, highways, rivers, and urban centers could be fitted with power function (y = a*xb ), with minimum R2 of 0.9507 for urban centers from 2000 to 2005; the increased permillages of built-up areas to mean elevation and mean slop could be fitted with exponential functions (y = a*ebx), with minimum R2 of 0.6657 for mean slop from 2005 to 2010. Besides, government policy could also impact expansion of built-up areas. In a nutshell, a series of conclusions were obtained through this study about the spatial features and driving factors of evolution of built-up areas in Zhejiang from 2000 to 2010.