26 October 2017 Bragg grating sensors for the monitoring load of production press machines
Author Affiliations +
Abstract
This article discusses the topic of the monitoring of the operating condition of the pressing machines. In the process of pressing there are a large acting of the forces of the press machine on the machined material. It is accompanied by an expression of deformation of parts of the pressing machines. Knowledge about the resulting loading is important for the final product quality and durability of these machines. In the case of multi-columned presses is important even load distribution among the individual columns. For this reason, it is necessary to monitor the load of the hydraulic pistons. Conventional approaches of load monitoring utilize piezoelectric sensors and strain gauges, which are sensitive to electromagnetic interference, require electrical power, subject to corrosion and action of moisture. A suitable alternative is the fiber Bragg gratings (FBGs) sensors, that those failures have. Their use for load monitoring production presses have been verified by the real measurement on a four-post hydraulic press ALPHA 4 from the company FORM + TEST Seidner. For measurements were used the FBG sensors and classic foil strain gauges (reference). Real measurement was performed during a load of press in the range from 0 to 2000 kN with a step of 500 kN.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Marcel Fajkus, Jan Nedoma, Pavel Mec, Jakub Cubik, Stanislav Kepak, Jan Jargus, Martin Novak, Radek Martinek, Vladimir Vasinek, "Bragg grating sensors for the monitoring load of production press machines", Proc. SPIE 10440, Optical Materials and Biomaterials in Security and Defence Systems Technology XIV, 104400P (26 October 2017); doi: 10.1117/12.2278223; https://doi.org/10.1117/12.2278223
PROCEEDINGS
6 PAGES


SHARE
Back to Top