Paper
7 August 2017 Development and verification of a measuring stand for recording the physical phenomena during turning
Author Affiliations +
Proceedings Volume 10445, Photonics Applications in Astronomy, Communications, Industry, and High Energy Physics Experiments 2017; 104456G (2017) https://doi.org/10.1117/12.2281041
Event: Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2017, 2017, Wilga, Poland
Abstract
The paper describes a measuring stand which allows recording physical phenomena during the turning. The stand allows recording the temperature in the machining zone, cutting forces and fast-changing images. The temperature in the machining zone was recorded using a FLIR SC 620 thermographic camera, and the obtained thermograms were analysed using the ThermaCam Researcher application. A PHANTOM v 5.2 camera with a NIKKOR 200 mm prime lens and CineViewer software was used to record and analyse the fast-changing images. The cutting forces were recorded in a measuring path which comprised a KISTLER 9257B dynamometer, KISTLER 5070A charge amplifier, and DynoWare software. The laboratory tests involved verification of the correct operation of this stand. The turning tests were performed on an elongated workpiece made of hard-machinable steel. The analysis of results allows a verification of the correct operation of the stand.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ł. Ślusarczyk and E. Franczyk "Development and verification of a measuring stand for recording the physical phenomena during turning", Proc. SPIE 10445, Photonics Applications in Astronomy, Communications, Industry, and High Energy Physics Experiments 2017, 104456G (7 August 2017); https://doi.org/10.1117/12.2281041
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cameras

Physical phenomena

High speed cameras

Analytical research

Thermal imaging cameras

Thermal modeling

Light sources and illumination

Back to Top