16 October 2017 Metrology for the manufacturing of freeform optics
Author Affiliations +
Proceedings Volume 10448, Optifab 2017; 1044817 (2017) https://doi.org/10.1117/12.2279819
Event: SPIE Optifab, 2017, Rochester, New York, United States
Abstract
Recently the use of freeform surfaces have become a realization for optical designers. These non-symmetrical optical surfaces have allowed unique solutions to optical design problems. The implementation of freeform optical surfaces has been limited by manufacturing capabilities and quality. However over the past several years freeform fabrication processes have improved in capability and precision. But as with any manufacturing, proper metrology is required to monitor and verify the process. Typical optics metrology such as interferometry has its challenges and limitations with the unique shapes of freeform optics. Two contact metrology methods for freeform metrology are presented; a Leitz coordinate measurement machine (CMM) with an uncertainty of ± 0.5 μm and a high resolution profilometer (Panasonic UA3P) with a measurement uncertainty of ± 0.05 μm. We are also developing a non-contact high resolution technique based on the fringe reflection technique known as deflectometry. This fast non-contact metrology has the potential to compete with accuracies of the contact methods but also can acquire data in seconds rather than minutes or hours.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Todd Blalock, Todd Blalock, Brian Myer, Brian Myer, Ian Ferralli, Ian Ferralli, Matt Brunelle, Matt Brunelle, Tim Lynch, Tim Lynch, } "Metrology for the manufacturing of freeform optics", Proc. SPIE 10448, Optifab 2017, 1044817 (16 October 2017); doi: 10.1117/12.2279819; https://doi.org/10.1117/12.2279819
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT

Freeform and conformal optical manufacturing
Proceedings of SPIE (June 03 2013)
Integrated manufacturing of complex freeform surfaces
Proceedings of SPIE (October 14 2013)
Acylinder and freeform optical manufacturing
Proceedings of SPIE (October 10 2015)
Freeform optics manufacturing
Proceedings of SPIE (October 15 2017)
Larger format freeform fabrication and metrology
Proceedings of SPIE (June 14 2018)

Back to Top