24 October 2017 HAZ characteristics of laser cladding remanufacturing ductile iron component
Author Affiliations +
Proceedings Volume 10457, AOPC 2017: Laser Components, Systems, and Applications; 1045717 (2017) https://doi.org/10.1117/12.2283511
Event: Applied Optics and Photonics China (AOPC2017), 2017, Beijing, China
Abstract
Ductile cast iron is a ferrous alloy characterized by spheroidal graphite, and it is difficult to be remanufactured own to the complicated phase evolution . In this work, laser cladding using Ni-Cu based alloy power as the cladding material has been completed. The grain morphology of cladding and related phase evolution in partially melted zone (PMZ) and heat affected zone (HAZ) by single pass and multi layer cladding have been investigated. Scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy dispersive microanalysis (EDS) were used to identity the microstructure and phase composition of cladded layers and interfaces. Microhardness of the samples was evaluated after laser cladding. The result revealed that entirely different phases were formed by single pass and multi layer cladding progress. Nickel, carbon, and copper elements migrated apparently across the interface. It was also found the microhardness of the substrate was lower than that of the cladded layers, PMZ and HAZ. In samples processed with single pass and multi layer cladding, microhardness in PMZ reached up to 900 and 800 HV respectively.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yongjian Li, Shiyun Dong, Shixing Yan, Jiawu He, Peng He, Binshi Xu, "HAZ characteristics of laser cladding remanufacturing ductile iron component", Proc. SPIE 10457, AOPC 2017: Laser Components, Systems, and Applications, 1045717 (24 October 2017); doi: 10.1117/12.2283511; https://doi.org/10.1117/12.2283511
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT


Back to Top