24 October 2017 Study on VCSEL laser heating chip in nuclear magnetic resonance gyroscope
Author Affiliations +
Proceedings Volume 10457, AOPC 2017: Laser Components, Systems, and Applications; 104572O (2017) https://doi.org/10.1117/12.2284919
Event: Applied Optics and Photonics China (AOPC2017), 2017, Beijing, China
In recent years, atomic gyroscope has become an important direction of inertial navigation. Nuclear magnetic resonance gyroscope has a stronger advantage in the miniaturization of the size. In atomic gyroscope, the lasers are indispensable devices which has an important effect on the improvement of the gyroscope performance. The frequency stability of the VCSEL lasers requires high precision control of temperature. However, the heating current of the laser will definitely bring in the magnetic field, and the sensitive device, alkali vapor cell, is very sensitive to the magnetic field, so that the metal pattern of the heating chip should be designed ingeniously to eliminate the magnetic field introduced by the heating current. In this paper, a heating chip was fabricated by MEMS process, i.e. depositing platinum on semiconductor substrates. Platinum has long been considered as a good resistance material used for measuring temperature The VCSEL laser chip is fixed in the center of the heating chip. The thermometer resistor measures the temperature of the heating chip, which can be considered as the same temperature of the VCSEL laser chip, by turning the temperature signal into voltage signal. The FPGA chip is used as a micro controller, and combined with PID control algorithm constitute a closed loop control circuit. The voltage applied to the heating resistor wire is modified to achieve the temperature control of the VCSEL laser. In this way, the laser frequency can be controlled stably and easily. Ultimately, the temperature stability can be achieved better than 100mK.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiaoyang Liang, Xiaoyang Liang, Binquan Zhou, Binquan Zhou, Wenfeng Wu, Wenfeng Wu, Yuchen Jia, Yuchen Jia, Jing Wang, Jing Wang, } "Study on VCSEL laser heating chip in nuclear magnetic resonance gyroscope", Proc. SPIE 10457, AOPC 2017: Laser Components, Systems, and Applications, 104572O (24 October 2017); doi: 10.1117/12.2284919; https://doi.org/10.1117/12.2284919


Robust MEMS gyroscope for oil and gas exploration
Proceedings of SPIE (June 04 2014)
VCSELs for interferometric readout of MEMS sensors
Proceedings of SPIE (March 17 2016)
Quantum gyroscope based on Berry phase of spins in diamond
Proceedings of SPIE (February 19 2018)
Inertial navigation for the urban warrior
Proceedings of SPIE (July 08 1999)
Chip-scale atomic devices at NIST
Proceedings of SPIE (March 12 2007)

Back to Top