24 October 2017 A new linear structured light module based on the MEMS micromirror
Author Affiliations +
Proceedings Volume 10458, AOPC 2017: 3D Measurement Technology for Intelligent Manufacturing; 104581H (2017) https://doi.org/10.1117/12.2285455
Event: Applied Optics and Photonics China (AOPC2017), 2017, Beijing, China
Abstract
A new linear structured light module based on the Micro-Electro-Mechanical System (MEMS) two-dimensional scanning micromirror was designed and created. This module consists of a laser diode, a convex lens, and the MEMS micromirror. The laser diode generates the light and the convex lens control the laser beam to converge on a single point with large depth of focus. The fast scan in horizontal direction of the micromirror will turn the laser spot into a homogenous laser line. Meanwhile, the slow scan in vertical direction of the micromirror will move the laser line in the vertical direction. The width of the line generated by this module is 300μm and the length is 120mm and the moving distance is 100mm at 30cm away from the module. It will promote the development of industrial detection.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peng Zhou, Peng Zhou, Wenjiang Shen, Wenjiang Shen, Huijun Yu, Huijun Yu, } "A new linear structured light module based on the MEMS micromirror", Proc. SPIE 10458, AOPC 2017: 3D Measurement Technology for Intelligent Manufacturing, 104581H (24 October 2017); doi: 10.1117/12.2285455; https://doi.org/10.1117/12.2285455
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT


Back to Top