24 October 2017 Study on the high-frequency laser measurement of slot surface difference
Author Affiliations +
Proceedings Volume 10458, AOPC 2017: 3D Measurement Technology for Intelligent Manufacturing; 104581K (2017) https://doi.org/10.1117/12.2285565
Event: Applied Optics and Photonics China (AOPC2017), 2017, Beijing, China
Abstract
In view of the measurement of the slot surface difference in the large-scale mechanical assembly process, Based on high frequency laser scanning technology and laser detection imaging principle, This paragraph designs a double galvanometer pulse laser scanning system. Laser probe scanning system architecture consists of three parts: laser ranging part, mechanical scanning part, data acquisition and processing part. The part of laser range uses high-frequency laser range finder to measure the distance information of the target shape and get a lot of point cloud data. Mechanical scanning part includes high-speed rotary table, high-speed transit and related structure design, in order to realize the whole system should be carried out in accordance with the design of scanning path on the target three-dimensional laser scanning. Data processing part mainly by FPGA hardware with LAbVIEW software to design a core, to process the point cloud data collected by the laser range finder at the high-speed and fitting calculation of point cloud data, to establish a three-dimensional model of the target, so laser scanning imaging is realized.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jia Bing, Jia Bing, Qiongying Lv, Qiongying Lv, Guohua Cao, Guohua Cao, } "Study on the high-frequency laser measurement of slot surface difference", Proc. SPIE 10458, AOPC 2017: 3D Measurement Technology for Intelligent Manufacturing, 104581K (24 October 2017); doi: 10.1117/12.2285565; https://doi.org/10.1117/12.2285565
PROCEEDINGS
8 PAGES


SHARE
Back to Top